Environmental Heating Solutions Ltd is a UK based company established in 2006 to market eco-friendly and innovative heating solutions for greater indoor comfort and climate control. Central to or activities is our passion for protecting the environment and improving standards in housing and the built environment. Our focus is to deliver the benefits of proven and low cost ( purchase and running ) renewable energy heating systems to charities, village halls, householders and businesses.
We operate across Great Britain with local representation in numerous locations. Our installations strech from Cornwall to the West Highlands and Islands.
We operate across Great Britain with local representation in numerous locations. Our installations strech from Cornwall to the West Highlands and Islands.
Services
Heat pumps move heat from one location to another.
This is done using the state change and compression of a refrigerant from gas to liquid and back again utilising a well known physics formula called the Ideal Gas Law.
When used for heating heat pumps move heat from the outside in to the building.
The source of the heat can be the ground, water or air.
An air source heat pump (ASHP) uses the outside air, which is often easier, cheaper and more effective than the two other sources.
This method of providing heat can be surprisingly effective, often providing three to four times as much heat compared to the electricity consumed in running the unit.
This is done using the state change and compression of a refrigerant from gas to liquid and back again utilising a well known physics formula called the Ideal Gas Law.
When used for heating heat pumps move heat from the outside in to the building.
The source of the heat can be the ground, water or air.
An air source heat pump (ASHP) uses the outside air, which is often easier, cheaper and more effective than the two other sources.
This method of providing heat can be surprisingly effective, often providing three to four times as much heat compared to the electricity consumed in running the unit.
The Energy Saver is comparatively non-intrusive to install.
The indoor and outdoor units need to be connected for electricity and refrigerant.
Further, the indoor unit needs to have a condensation evacuation hose routed outside.
These connections are made through a 50mm/2 hole in a wall that is drilled during installation.
The maximum distance between the indoor and outdoor units is dependant on the model selected and range from 15 to 50 metres.
Most units are installed within one working day, however it can take longer for more complex installations, e.g. if there is more than one unit or if the concealed solution is specified.
The indoor and outdoor units need to be connected for electricity and refrigerant.
Further, the indoor unit needs to have a condensation evacuation hose routed outside.
These connections are made through a 50mm/2 hole in a wall that is drilled during installation.
The maximum distance between the indoor and outdoor units is dependant on the model selected and range from 15 to 50 metres.
Most units are installed within one working day, however it can take longer for more complex installations, e.g. if there is more than one unit or if the concealed solution is specified.
Heat distribution is also improved if you leave doors open as much as possible.
The unit will not perform well if doors are shut.
Optionally we can supply a fan assissted Heat Transfer Kit to improve circulation while doors are closed.
The warm air will spread around the house over time, as the unit will minimise temperature differences.
The Energy Saver circulates 250-500 cubic metres of air per hour.
The indoor unit should be placed in an open area giving the unit the ability to circulate the air in the house.
The unit will not perform well if doors are shut.
Optionally we can supply a fan assissted Heat Transfer Kit to improve circulation while doors are closed.
The warm air will spread around the house over time, as the unit will minimise temperature differences.
The Energy Saver circulates 250-500 cubic metres of air per hour.
The indoor unit should be placed in an open area giving the unit the ability to circulate the air in the house.
The Energy Saver requires very little maintenance.
The only maintenance required is for cleaning the air filters in the indoor unit.
They should be cleaned several times per year - frequency depending on use and building.
The filter cleaning only takes a few minutes - remove the dust with a soft brush, vacuum cleaner or a damp cloth.
The filter location depends on the solution installed.
You will be shown how to clean the filters during installation.
There is no need for an annual inspection.
The only maintenance required is for cleaning the air filters in the indoor unit.
They should be cleaned several times per year - frequency depending on use and building.
The filter cleaning only takes a few minutes - remove the dust with a soft brush, vacuum cleaner or a damp cloth.
The filter location depends on the solution installed.
You will be shown how to clean the filters during installation.
There is no need for an annual inspection.
This Savings Calculator will give you an indication of typical savings that can be achieved for an average size domestic house.
We have done long term running cost measurements and found these factors will normally have a small impact of up to 30%.
Change only the first two (Heating source and AnnualHeating Bill).
For Gas and Heating oil, input the amount you pay for Gas or Heating Oil (exclude electricity costs).
For Electricity, input the full cost.
This calculation is an estimate based on long term usage measurements (see here for more details).
We have done long term running cost measurements and found these factors will normally have a small impact of up to 30%.
Change only the first two (Heating source and AnnualHeating Bill).
For Gas and Heating oil, input the amount you pay for Gas or Heating Oil (exclude electricity costs).
For Electricity, input the full cost.
This calculation is an estimate based on long term usage measurements (see here for more details).
Reviews
Be the first to review Environmental Heating Solutions.
Write a Review
